Windows Marketplace V.90 Bedienungsanleitung PDF herunterladen (Seite 41)

&Wn Store Current Configuration

This command stores certain command options and S-register values into the

modems nonvolatile memory. The ATZ command or a powerup reset of the mo-

dem restores this profile.

Result Codes:

OK n = 0

ERROR Otherwise

&Yn Select Stored Profile for Hard Reset

This command does not change the behavior of the modem but is included for

compatibility with applications that issue the &Y0 command:

&Y0: Select stored profile 0 on powerup

&Y1: ERROR.

Result Codes:

OK n = 0

ERROR Otherwise

&Zn=x Store Telephone Number

This command is used to store up to four dialing strings in the modems nonvola-

tile memory for later dialing. The format for the command is &Zn = stored num-

ber where n is the location 0?3 to which the number should be written. The dial

string may contain up to 40 characters. The ATDS = n command dials using the

string stored in location n.

Result Codes:

OK n = 0, 1, 2, 3

ERROR Otherwise

\An Select Maximum MNP Block Size

The modem will operate an MNP error corrected link using a maximum block

size controlled by the parameter supplied.

\AO 64 characters.

\A1 128 characters.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

Keine Kommentare

Windows Marketplace V.90 Bedienungsanleitung Seite 41